New & On-Sale
STINGER / ZIPS
Super Skinny and Long spindle for more FUN!!!
1 Universal Base
1 Stainless Spindle
1 Hollow Rammer
1 Solid Rammer
1 Drill Guide
Ones with tube support have the drill guide drilled into it.
1/2 inch 3 inch tube
5/8 inch 3.125 inch tube
3/4 inch 3.750 inch tube
7/8 inch 4.375 inch tube
1 inch 5.0 inch tube
1.25 inch 6.25 inch tube
1.5 inch 10 inch tube
Standard Endburner Tooling with de-laval nozzle.
We now also offer a "Hot nozzle size" with a 10% smaller nozzle to build more thrust.
You can also just buy the replacement spindle and specify "Hot" and I'll fix ya up if you already have an endburner kit. Mine or someone else's.
Includes 3 rammers with pull pin.
Stainless spindle & the nozzle rammer for extra durability. The larger sizes will have a stainless tip on the nozzle rammer, however the whole rammer will not be stainless to save cost & weight!
1lb Tube Supports
Clam shell support made to grab the tube tightly to stop compression wrinkles.
Standard made for our NEPT Tubes, T handle wrench included.
Recess is optional
7.5in. is standard rocket length,
5.5in. is for a short strobe or whistle motor
3.75 is for a stinger or sali whistle motor, these are drilled for stingers also
Additional sizes (heights / tube size) may be custom ordered.
3lb Tube Supports
These supports are made to fit tight on the tubes to stop compression wrinkles.
Tubes we have on hand to fit to are: Nept 3/16 wall in lengths to match supports.
10" is a standard black powder length, or hybrid and extreme
7" is for strobes, or whistles
5in is for stingers/ sali whistle, or skinny rockets. these are drilled for the stingers already.
Additional sizes can be custom made.
Inset for tube extender optional.
Medium Star Plates 4x4
Sized just right to use in a 2 ton arbor press.
They will also work on a 1 ton press with a little more moisture and less pressure.
Plates are 4" x 4" size.
Don't forget to purchase a pressing plate if you need one!
Large Star Plates 6x6
6 x 6 in outside dimension with Super Deep Hole Plates so you don't have to double fill them. It takes me a little longer to machine them but it will save you tons of time and energy . These will also be FILLED with pins. No scrimping on pins for us. When you want to press stars as fast as possible there is only one way. Loads of pins in that plate! Check out the depth of the hole plates on competitors and then come get one that's easier to use.
Machined out of solid 6061 Aluminum bar with all surfaces finished smooth and shiny for easy cleaning. Pins are made from Delrin. They are much more forgiving than other plates and are what commercial operations world wide use for both safety and longevity. 3/4in. and up plates have bolt in pins.
Hand Operated Fuse Punch
Punches an 1/8" hole through 1/4" time fuse which is big enough for 3 strands of gray quickmatch or two strands of your homemade goodness. :)
Super BP Rocket Kits
These should be called Extra Super kits cause they come with a longer spindle than other folks are using. More spindle means more power for the best rockets you can get. Whether it's a sugar rocket you are making or a great black powder rocket with an awesome tail. This is what you need. As always our stainless spindles are standard as is the vented rammers that make using them easier and safer.
Precision machined and hand polished for that sparkling shine. Nothing beats our quality.
Core Burner Rocket Kit includes:
1 Universal Base
1 Stainless Spindle
4 Rammers and pull pin.
Spindle remover is the best in the business and is sold separately.
6lb NEPT Rocket Tubes
New England Paper Tubes - High Quality Rocket Tubes
A little undersized from what they should be. Hence the super sale.
Rocket Tooling Sets with Support and Tubes
Rocket Kits complete with tooling, tube support, NEPT tubes and header tubes/ discs.
4oz. 25 NEPT tubes 1.75in. ball shells and a roll of 1/2in. gummed tape
8oz. 20 NEPT tubes 2.5in. ball shells and a roll of 1/2in. gummed tape
1lb with support, 20 NEPT tubes , header tubes and discs
3lb with support 20 NEPT tubes , header tubes and discs
Complete ready to go kits. Just add fuel & sticks!
Don't forget extra NEPT tubes!
Recommended stick size:
4oz - 1/4 x 36"
8oz - 1/4 x 36"
1lb - 1/4 x 36" OR 3/8 x 36"
3lb - 3/8 x 36" OR 7/16 x 48" OR 1/2 x 36"
Custom Made Tooling
Woody's Next Outing - Western Winter Blast...
Return of Woody's "Blog" - What's Happening at Woody's
After sending Caleb some adorable photos of the kids & pets
this week he pretty much demanded that we share them with
you - our awesome customers - turned friends - turned family!
So here we are; starting up the "blog" again.
Who knows what you might find hiding in here.
Hope you enjoy! - Sarah