Portable Rocket Presses
6 Ton = Working area is 6 x 8 x 19.5 inches tall. 2.5in. cylinder @ 3000 psi max. This will do any rocket 3lb and under, most all of your normal comet pumps and star plates. I even press short 6lb motors with it regularly. This press is small and lightweight, easily put into the trunk of any car and presses rockets extremely fast with it's smaller cylinder. My go to press!
Press weight is ONLY 55 lbs!
10 Ton = Working area 6 x 8 x 20inches tall. 3in. cylinder @ 3000 psi max. This press is small enough to easily be transported in the trunk of your car yet manly enough to press all the star plates with ease. Press weight 85lbs.
14 Ton = Working area 6 x 8.5 x 24 inches tall. 3.5in. cylinder @ 3000 psi max. This will do all sizes of tooling through 6lb rockets and our 6in. comet pumps! This is the big daddy. When you need tons of pressure and want the versatility of a large working envelope there is no match! Yet it still breaks down so without too much trouble or with a little help it's portable. Press weight 110lbs.
Quick disconnects on the long hoses for portability and to locate your pump under your table away from where you are working. Pressure adjusted externally with a hand knob - you can adjust your pressure for whatever devices you are pressing with just a quick twist by hand! 1/2" blast shield on the front with a nice open design for ease of use.
These do have a pressure gauge which you can go by but, We do recommenend a pressure to force gauge for ease of use. I use two PtoF gauges on my setup. One double power 15,000 for big adjustments and a single power 10,000 for dialing the pressure very accurately.
A quick overview.